Grow room HVACD maintenance plans: getting the most out of your investment

Too often, indoor agriculture facility operators fail to consider the maintenance of their climate system in their overall staffing and business plans. In these cases, systems maintenance is treated as an afterthought, or not addressed at all during planning stages, leading to the onus being on the cultivation team to manage maintenance in a facility.

Improper maintenance can be catastrophic
A poorly maintained grow room climate system will begin to underperform in ways that aren’t easy to detect at first. For instance, dirty filters will limit airflow across the cooling coils, forcing them to run more often to achieve sufficient cooling, or not achieve sufficient cooling at all. Dirty strainers in chilled water systems will force pumps to work harder and can result in diminished chiller capacity resulting from flow rate disruptions. Uncleaned condenser coils will limit heat exchange in the refrigerant circuit, resulting in less cooling output in exterior units. 

These are just a few examples. Diminished capacities caused by improper maintenance, first impact energy use. The systems begin using more energy than they need to do the job, which goes straight to the cultivator’s bottom line in the form of operating costs.

As these issues progress, systems may begin to fail to maintain climate parameters consistently. Brief departures from setpoints may not be noticeable or particularly concerning at first, but inconsistency in parameters can lead to inconsistency in yields. It can also create biosecurity risks as fluctuations in humidity and temperature can leave plants particularly vulnerable to fungus and other pests.

If filters, ducting and air sterilization equipment associated with the HVACD system hasn’t been properly maintained, this increased vulnerability is exacerbated by increased infiltration of those same pests. 

Left untreated, performance will usually continue to degrade, ultimately resulting in a requirement for expensive emergency service that could have been handled with far less expense (and stress) had the maintenance been properly managed in the beginning. Sometimes the emergency service is limited to performing long overdue maintenance, and sometimes it results in premature failure of equipment, such as compressor or fan motor failure. In any facility, this is disruptive and expensive. In some, it’s catastrophic.

What to include in your HVACD maintenance plan
Planning and design
General maintenance requirements for the systems that will be utilized in your facility should be understood on at least a basic level before the design is implemented. When the various HVACD systems options are discussed during the predesign phase, your mechanical engineer should be able to explain the varying degrees of maintenance complexity associated with each option. This will help inform the decisions by the owners from the beginning of the process.

Basic training
Once the system is installed, a general training walk-through with the provider of the system to ensure that facility operators understand the basic functions of the system is extremely helpful. This way, the operations team understands what they’re working with at the user level, and who to call if they need support.

Accountability and support
Maintenance recommendations for the system, and for each individual piece of equipment as identified by the manufacturer, should be rigorously followed. It’s vital that whoever oversees this maintenance is held accountable to ensure that systems are properly maintained. Usually, this is accomplished with a scheduling tool of some kind (even if it’s as simple as calendar reminders) and a log sheet that identifies what maintenance was performed, when it was performed, and any pertinent notes associated with the maintenance.

This step is usually where professionals are best suited to take over. For example, Surna offers maintenance and emergency service as an option for our clients with every system. Alternatively, your installing contractor may offer maintenance services as well. 

Monitoring
A good controls system can also be a good early warning sign for climate maintenance requirements. SentryIQ® tells us at what capacity the major components of our systems are operating. Anomalies in power use, run times, or other changes in behaviors of equipment are displayed and can be a kind of canary in the coal mine for maintenance needs.

Failures of any individual pieces of equipment will trigger an alarm via text or email to the facilities team. Similarly, data collection around room parameters provided with most control systems can also be helpful. Reviewing climate parameters and identifying anomalies or unusual drifting of climate parameters can be a trigger to check the components of your systems to ensure they don’t require maintenance. 

For more information:
Surna
1780 55th Street, Suite A Boulder, CO 80301
T: (303) 993-5271
F: (303) 955-2544
info@surna.com  
surna.com      

 


Publication date:



Receive the daily newsletter in your email for free | Click here


Other news in this sector:


© MMJDaily.com 2021

Sign up for our daily Newsletter and stay up to date with all the latest news!

Subscribe I am already a subscriber